Original Article ID: 3431
The purpose of this article is to explain how to use the anonymous call rejection feature of the Yealink W52 Handset
This article applies to:
This article does not apply to:
Any other phones / devices
You can use anonymous call rejection feature to reject incoming calls from anonymous callers. Anonymous call rejection automatically rejects incoming calls from callers who deliberately block their identities and numbers from showing up. You can configure anonymous call rejection feature on a per-line basis.
*** Note: The anonymous call rejection feature is not available on all servers. Contact your system administrator for more information.There is only one side anonymous call rejection feature (phone-side or server-side) can be configured via the handset. As of firmware version 73, the system administrator can configure the anonymous call rejection mode via the configuration files. The default anonymous call rejection mode is Local, and the phone-side anonymous call rejection feature is configured via the handset.If the anonymous call rejection mode is configured to Server, the server-side anonymous call rejection feature is configured via the handset. For more information, contact your system administrator.
To configure anonymous call rejection feature for a specific line via the handset:
1. Press to enter the main menu.
2. Select ->Anon.Call Rejection.
The LCD screen displays the incoming lines currently assigned to the handset.
3. Press or to highlight the desired line, and then press the OK soft key.
4. Press or to select the desired value from the Status field.
5. Press the OK soft key to accept the change.