Original Article ID: 3472
The purpose of this article is to show you how to restart the base for a Yealink W52
This article applies to:
This article does not apply to:
Any other phones / devices
In some instances, you may need to restart the base station to refresh the settings.
To restart the base station via the handset:
- Press to enter the main menu.
- Select ->System Settings->Base Restart.
- Enter the system PIN (default: 0000 or 9871).
- Press the Done soft key.
After the above steps, the registration LED and network status LED go out simultaneously. After a period of time, the LED indicators will illuminate solid green again when the base station restarts successfully.